As an adult, you learn that it is easier to forget things time and time again. After a whole day of work, you might find that you forgot your ADT alarm code! This post will cover how to turn off the ADT alarm system without the code.
There are various reasons why a homeowner might need to be reminded of their security code. Nevertheless, this can be a controversial issue. Giving out the security code to your home’s alarm can allow people to access your home.
Thus, when reflecting upon this, the ADT company would need to create a secure procedure to give out codes to the customers. Some people may attempt to get a replacement code by calling ADT.
However, ADT customer support is not authorized to provide you with a new code over the phone. This implies that the only thing you can do is wait for the alert to sound. Allow me to explain.
Turning off ADT Alarm system without code
As you may be aware, you only have a limited period of time to turn off your ADT alarm after it has been activated.
The alarm will last anything from 30 seconds to 3 minutes. Furthermore, the ADT team will contact you if you do not turn it off within this time limit, which you are unlikely to do if you do not have the code.
ADT service team will be able to provide you with the code needed to shut down your system. You will, however, be required to provide them with your password.
This is to ensure you are the owner of the system and for further deeper security measures. Nevertheless, you have other options.
System reset
Suppose you can’t turn off the alarm because you don’t have the code and can’t remember the password to acquire a new code from ADT. In that case, you’ll have to disable the system manually.
The alarm will be switched off once you’ve deactivated the system. This is, obviously, something you should only undertake as the last option.
The procedure for physically resetting the alarm may vary depending on the type of alarm you have. We can, however, provide you with a broad summary of what you must perform.
Locate the Alarm’s Battery Box.
The first step is to find the alarm’s battery compartment. It will most certainly be situated in the basement, near your circuit breaker.
You will most likely recall where the alarm system was situated when you had it installed. Theoretically, the battery box may be placed anyplace in your home.
After that, you’ll need to take out the battery. If you still hear the alert, don’t worry. Let me reassure you; this is very normal. The battery’s sole purpose is to supply backup power when the main electrical system is turned off, which will occur in the following stage.
Find the circuit breaker.
After you’ve found the battery, you may go on to the circuit breaker. You’ll want to look for the switch that links to the alarm system on the circuit breaker. The entire system will shut down if you turn this off, that is, assuming the battery was correctly detached.
Jumpstart the system
You may now turn off the system for 10 to 15 minutes. During this period, the power should be entirely depleted.
Obviously, your alarm system had been wailing for quite some time at this point. Because ADT would have been unable to obtain your password from you, cops will most likely have been dispatched to your location.
You aren’t going to be able to do anything about this. When the system is turned back on, perhaps the system will no longer go off. If that’s the case, you’ll have to start over and shut everything off.
After that, you’ll need to call ADT so that they can take care of the issue as quickly as possible.
Of course, when they arrive at your house, you’ll have to provide them proof that you own the alarm system.
ADT should be notified.
In most circumstances, you won’t be able to enter a new code once the system is back online. This implies you’ll need to get in touch with ADT. They’ll be able to give you an installer after that.
Only the installation code can be used to create new codes for ADT alarm systems. Obviously, only installers will have access to this number for security reasons.
Default installation codes may be found on the internet. Nevertheless, ADT does not use default installation codes. As a result, using them will be a waste of time.
Remember to write down any new codes you find. Get a new password as well. This way, you won’t have to worry about needing to switch off your ADT alarm system without a code ever again. Hopefully!
The bottom line
Turning your alarm system off without a code is a time-consuming operation. For security purposes, you obviously want it to be lengthy.
If you want to learn more, you might be asking yourself: What us the ADT alarm bypass. Check it out!
Once you receive a new code, hold on to it tightly! You want to make sure you don’t have to go through this again.
