How to reset the Reolink Argus 3 camera

In this article, I show how to reset the Reolink Argus 3 camera.

The process is straightforward and takes just a few seconds. After the reset, the camera returns to the factory default state, and you can start the setup all over again.

How to reset the camera

Make sure you have the reset needle that comes with the Kit or use a paper clip.

Reolink Argus Reset Needle
  • Get the reset needle that comes with the camera;
  • Look for the reset hole on the bottom of the camera;
  • Insert the needle into the hole, press, and hole the reset button;
  • Wait for until you hear the message "Factory Reset Succeeded";
  • Release the reset button.
Reolink Argus Reset Button

This process usually takes 3 to 5 seconds, and the camera will be ready for the new setup after you hear the message "Cameras has been started up, please run Reolink App, add the camera and set it up".

Setup the camera

After resetting the camera, follow the normal setup process.

Open the Reolink App and follow the step-by-step instructions.

You just need to point the mobile phone to the camera QR code to get started.

Reolink Argus 3 App

As you can see, the App shows a video with detailed instructions on how to set up the camera. Just follow what you see here to have your camera up and running.

Related articles

Here are some related articles that can help you.

Extra help

If the camera reset process is not working, just visit the Reolink support website and ask for help. The response time is usually very fast and helpful.  

I hope this article can help you to reset the Argus 3.

Please click the buttons below to share this information with your friends.

error: Alert: Content is protected !!